> For the complete documentation index, see [llms.txt](https://tools.desmoinesmaker.space/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://tools.desmoinesmaker.space/tool-areas/laser-vinyl-cutting/us-cutter-vinyl-cutter.md).

# US Cutter Vinyl Cutter

<figure><img src="/files/BaUj1uIKvQPg8rpeRf5U" alt=""><figcaption><p>US Cutter, 28" Model Vinyl Cutter</p></figcaption></figure>

## Description

US Cutter markets it as the 28" model. It's actual cutting width is just slightly under 24".

## Training

To get permission to use the Vinyl Cutter you have to be trained by a Tool Steward. Want to streamline the process? Watch the prepared video below and take some notes! Bring your notes into the training session and the process will go much, much faster!

{% embed url="<https://m.youtube.com/watch?v=__0-MCxNp8I>" %}
Training video for the vinyl cutter
{% endembed %}

## Manual

{% file src="/files/-Me51Y6KdYNbTYIDh35A" %}
Vinyl Cutter Manual
{% endfile %}

## Possible Starting Settings

Recommended cutting knife angle based on material thicknesses:&#x20;

45° - 2-6 mil / 60° - 6-15mil

{% tabs %}
{% tab title="Vinyl" %}
45° blade, 200-400 speed (depending on complexity of design), 70-80 pressure
{% endtab %}

{% tab title="Paper" %}
Recommended material thickness: 6-15mil
{% endtab %}

{% tab title="Plastic" %}

{% endtab %}

{% tab title="Other" %}

### Thin magnet sheet

60° blade, 100 speed, 320 pressure

{% endtab %}
{% endtabs %}